Whiteshell Reactor No. 1
Atomic Energy of Canada Limited Whiteshell Laboratories
เข้าสู่ระบบติดต่อกัน , Manitoba
(Aussi disponible en français)
The WR-1 organic-cooled research reactor was built starting in 1963, at the new Atomic Energy of Canada Limited (AECL) Whiteshell Nuclear Research Establishment (WNRE, but now named Whiteshell Laboratories). The WNRE site was built along the Winnipeg River, 100 km east-northeast of Winnipeg (The Winnipeg River does not flow past Winnipeg, but meanders from the Lake of the Woods to Lake Winnipeg).
The 60 MW (thermal) WR-1 research reactor was designed and built by Canadian General Electric for $14.5 million. The reactor was unique, in that it had vertical fuel channels, and the fuel was cooled by an organic liquid (an oil) rather than water. The neutrons were moderated by cool heavy water in a large calandria vessel surrounding the fuel channels. The reactor first achieved criticality on November 1 1965, and was used as a test reactor for the proposed organic-cooled CANDU power reactor. When that program ceased in 1972, WR1 was used for irradiation, experimentation and heating the WNRE site.
The reactor was a busy place, usually working around the clock. It had an availability (the amount of time it was available to operate) of 85% over its lifetime, which was (and is) exceptionally high for a research reactor. Using an organic coolant meant the reactor was run at low operating pressures, and had very low corrosion rates. The organic coolant also meant the reactor could be run at high temperatures, with outlet temperatures up to 425oC (!)
WR1 was shut down for the last time on May 17 1985, ostensibly for
economic reasons, although it was the youngest of AECL's large
research reactors. The reactor is no more, or at least not much
remains. It has been defuelled and largely disassembled. The
reactor is in an interim decommissioning stage - monitored safe storage
- awaiting the passage of a few more years for the radiation fields
(from the activated piping in the core) to decrease further before
the removal of fuel channels and the calandria vessel. The final
result will be either a "green-field" site or a building
for non-radioactive industrial use.
The various auxiliary rooms were converted to offices such as
my own, which is about 25 m from the reactor core. The control
room is half its former size, and now only contains monitoring
instruments. An operator is on site during the day, and on call at
night and weekends - a continuous operator presence is no longer
required since the reactor is defuelled and in long-term monitored
storage. The reactor hall is closed with the lights off, so one
cannot normally view the huge vertical
fuelling machine nor stand on the deck plate directly over the core.
One of the large concrete heat exchanger rooms found a new lease
on life as the เข้าสู่ระบบติดต่อกัน Large-Scale Gas Mixing Facility. All the old reactor
piping was removed from room, the flooring and ventilation were
rearranged, and the walls were cleaned and repainted. Instrumentation,
gas feed lines, a steam supply and a control room were added.
The result is a unique laboratory for studying gas mixing in
a large volume with a controlled environment. This is important research, to
understand how steam and light gases would mix and condense
inside a reactor containment building under postulated
reactor accident conditions. The facility, with its thick concrete
walls, simulates a reactor containment building, with respect
to gas mixing and steam condensation. The facility is within
the larger reactor building, so the environment outside the facility
is controlled; a controlled environment is always an asset in
To the outside world the most noticeable change in the WR-1 reactor
is the ventilation stack. The stack was known as the "stank"
- a combination emergency coolant tank and ventilation stack -
but the tank part (the ball at the top) was removed a few years
ago, after WR-1 had been defuelled and disassembled. It was checked for
any contamination, then released for
scrap. I believe it became a storage bin on someone's farm.
The stank is shown on page 1 of the technical description of WR-1.
The legacy of the successful WR-1 reactor is that organic coolants are still being considered for future reactor designs - they can operate hotter and at lower pressures than water-cooled reactors. Higher operating temperatures would increase the thermal efficiency of power reactors (the amount of electricity produced divided by the amount of heat produced in the reactor core). Lower pressures would reduce maintenance costs and pressure vessel design requirements. Also, the moderator-dump concept used in WR-1 lives on in Canada's next research reactor - the Irradiation Research Facility (IRF).
A public brochure, updated in March 1982, is found at the following four sites:
A) WR-1 Whiteshell Reactor No. 1
B) WR-1: Unique Among Research Reactors
C) WR-1 Design Details
เข้าสู่ระบบติดต่อกัน D) Fact Sheet: WR-1 Reactor
CNS home page